plus VAT.
Please note: Notes on delivery time
Free shipping (Germany, mainland)!
Shippingtime: On request
- Article no: BGHLOLFB

Our employee Ingo Jüstel will be happy to assist you:
+49 7151 - 2564811 or info@lion-care.com
Dimensions: | 1800 x 1800 mm |
Heat resistance (permanent): | 1500° C |
Heat resistance (short term): | 2500° C |
Weight: | 7 kg |
Please note that the terms "fire blanket", "fire protection blanket" and "fire containment blanket" are used synonymously in the following, as the term "fire blanket" is used colloquially for this type of protective blanket. Strictly speaking, the fire is fought by limiting/containing the fire and not by actively extinguishing it.
Fires involving lithium-ion batteries continue to pose a major challenge for people and the environment. Traditional fire extinguishers have great difficulties with fires involving these energy sources.
This fire blanket is the simplest, easiest and most effective method of isolating fires involving lithium-ion batteries.
If you are interested, please contact us for an individual offer. By e-mail(info@lion-care.com), via the contact form or by telephone (07151 - 2564811).
Features, equipment and use of the Bridgehill Lithium Fire Blanket
The fire blanket has the dimensions 1800 x 1800 mm with a weight of 7 kg. Compared to the Car Fire Blanket or Forklift Fire Blanket, the blanket is significantly thicker and therefore also suitable for placing directly on battery packs.
Storage in a practical Smartbag
The blanket is supplied in a practical carrying bag for storage. If the fire blanket is stored permanently in the bag, the manufacturer provides a lifetime guarantee on the blanket.
Use of the fire blanket / fire blanket - also possible with just one person
Thanks to its compact size, the blanket can be used by one person. The first step is to spread the blanket out on the floor in front of the burning battery. The blanket must then be placed on the fire or carefully thrown over it. Only after 20 minutes should the blanket be removed and the battery placed in a water bath or similar. This will prevent the fire from flaring up again immediately. If possible, personal protective equipment should always be worn during use. You can find an application example in the Videos tab.
Also for preventive use
The blanket is also suitable for safely covering endangered batteries during storage. This means that fires with major damage can be ruled out from the outset.
Best used in combination with the Forklift Fire-Blanket Small
In order to prevent smoke build-up when extinguishing / containing the battery edge, we recommend using the BRIDGEHILL Forklift Fire Blanket Small fire blanket / fire blanket for forklifts and electric vehicles / electric cars, which is placed on top of the Lithium Fire Blanket, when using the fire blanket / fire blanket shown here. The actual fire is effectively contained by placing the battery fire blanket directly on top, while the additional use of the BRIDGEHILL Forklift Fire Blanket Small fire blanket / fire blanket for forklifts and electric vehicles / electric cars provides improved protection of the surrounding area from smoke caused by the toxic gases and vapors produced when Li-ion batteries catch fire.
Development and quality assurance of the Lithium Fire Blanket
The Norwegian developer designed this highly effective fire blanket in collaboration with firefighters. The long experience with electromobility in Norway has contributed significantly to its success. In addition, strict multi-stage quality checks on each individual blanket ensure that only flawless products are sold.
Patented fabric and coating with experience from space travel
The special coating, which includes natural materials such as quartz sand, enables the highest possible quality for fire blankets. The fabric used, with the brand name BridgeTech™, uses materials that are also used in the heat shields of spacecraft.
Can be used in many industries
The fire blanket is recommended for all industries that work with lithium-ion batteries. For example, in garages, at vehicle manufacturers, battery manufacturers or in the recycling industry.
Extinguishing blankets for electric cars, industrial trucks and other lithium-ion batteries
Fires involving electric cars and industrial trucks are a particular focus of applications. Battery-powered ants and forklift trucks have long been used in intralogistics within companies, and the number of electric cars has also increased significantly in recent years. Both types of vehicle have powerful Li-ion batteries, which pose a great danger to people and the environment in the event of a fire. With its various designs, Bridgehill offers a suitable model for every application.
Different sizes and application scenarios for Bridgehill fire blankets
In addition to the dimensions, the fire blankets also differ in terms of their usability and recommended application contexts. The majority of the models have been developed for single use, but with the reusable Care Fire Blanket Professional V4, Bridgehill offers an ideal fire blanket / fire blanket for electric vehicles that is reusable, especially for fire departments. Below you will find an overview of the different versions of Bridgehill fire blankets.
Type / Name | Dimensions | Area of application and properties of the rechargeable fire blanket |
---|---|---|
5000 x 5000 mm |
Specially developed for industrial trucks and electric cars; direct application on lithium-ion batteries is not recommended; for single use |
|
7000 x 7000 mm |
Specially developed for industrial trucks and electric cars; direct application on lithium-ion batteries is not recommended; for single use |
|
1500 x 1500 mm |
for small to medium lithium batteries; direct application on batteries up to 2KWh; for peak temperatures of up to 2500 °C, reusable several times (depending on fire load) |
|
3000 x 3000 mm |
for small to medium-sized lithium batteries; can be placed directly on batteries up to 2KWh; can be reused several times for peak temperatures of up to 2500 °C(depending on fire load) |
|
5000 x 5000 mm |
for small to medium-sized lithium batteries; can be placed directly on batteries up to 2KWh; can be reused several times for peak temperatures of up to 2500 °C(depending on fire load) |
|
6000 x 8000 mm |
High-performance fire blanket for car fires; can be used for fire extinguishing, insulation and as a fire sail; can be reused several times for peak temperatures of up to 2500 °C(depending on fire load) |
|
1800 x 1800 mm |
for large lithium batteries (e-scooters, e-bikes, ASP containers); can be placed directly on batteries over 2KWh; for peak temperatures of up to 2500 °C |
|
2500 x 3600 mm |
for large lithium batteries (e-scooters, e-bikes, ASP containers); direct placement on batteries over 2KWh; for peak temperatures of up to 2500 °C |
The developer Bridgehill - pioneer in the field of fire blankets
Bridgehill has set itself the goal of protecting life, property and the environment. With the Bridgehill Fire Blankets product range, the Norwegian company from Larvik aims to enable both firefighters and laypersons to contain fires in homes, hotels, public facilities, parking lots, ferries, warehouses, etc.
Efficient firefighting of battery fires - increasingly important in the future
Lithium-ion batteries will be indispensable in all industrial and increasingly also in private applications in the coming years. However, if used improperly, batteries can pose a potential hazardduring production, storage and transportation that should not be underestimated . By purchasing this extinguishing blanket / fire blanket, you protect yourself from the outset against major financial damage that can be caused by battery fires, for example.
In use for you
Please do not hesitate to contact us if you have any questions. We look forward to hearing from you!
About the term "fire blanket"
At EU level, there is a standard DIN EN 1869:201910 for the term extinguishing blanket / fire blanket, but this refers to the standard fire test object "Deep-frying equipment with a filling quantity of max. 3 liters of cooking oil/fat", so that an extinguishing blanket / fire blanket according to the above standard is intended for extinguishing cooking oil and cooking fat fires. Please note that the products offered here do not comply with the DIN EN 1869:201910 standard and are not intended / approved for extinguishing cooking oil and cooking fat fires. The intended use of the extinguishing blanket / fire blanket presented here is to contain / fight Li-ion battery fires.
If you have any questions on this topic, please do not hesitate to contact us by e-mail(info@lion-care.com), via the contact form or by telephone (07151 - 2564811).
Dimensions: | 1800 x 1800 mm |
Heat resistance (permanent): | 1500° C |
Heat resistance (short term): | 2500° C |
Weight: | 7 kg |
Application example BRIDGEHILL Lithium Fire Blanket in combination with Car Fire Pro X
Bridgehill Lithium Fire Blanket and Car Pro X Fire Blanket used on Lithium-ion battery module-fire from Bridgehill on Vimeo.
Application example BRIDGEHILL Lithium-Fire-Blanket
Lithium Fire Blanket from Bridgehill on Vimeo.
Comparison of extinguishing blankets for Li-ion batteries
The table below shows a comparison of the different extinguishing blankets for electric cars and normal Li-ion batteries.
Type / Name | Dimensions | Area of application and properties of the battery extinguishing blanket |
---|---|---|
1600 x 1600 mm |
Small Li-ion batteries from smartphones, toys, tablets, etc.; direct application is not recommended |
|
1800 x 1800 mm |
Small and medium-sized batteries such as e-bike batteries etc.; also for direct placement on Li-ion batteries; |
|
2500 x 3600 mm | medium-sized batteries, also from industrial trucks or electric cars; particularly thick material and suitable for placing directly on Li-ion batteries | |
5000 x 5000 mm |
Specially developed for industrial trucks and electric cars; direct application on lithium-ion batteries is not recommended; for single use |
|
7000 x 7000 mm |
Specially developed for industrial trucks and electric cars; direct application to lithium-ion batteries is not recommended; for single use |
|
BRIDGEHILL Car Fire Blanket Fire blanket for electric vehicles |
6000 x 8000 mm |
Specially developed for electric cars; direct application to lithium-ion batteries is not recommended; for single use |
BRIDGEHILL Car Fire Blanket PROFESSIONAL V4 (discontinued model) |
6000 x 8000 mm |
Specially developed for electric cars; direct application to lithium-ion batteries is not recommended; reusable |
6000 x 8000 mm |
Specially developed for electric cars; direct application on lithium-ion batteries is not recommended; reusable, better sliding properties and significantly lighter |
Leider nein. Speziell Brände von Lithium-Ionen-Batterien sind chemische Brände, die sauerstoffunhabhängig sind. Sie brennen selbst dann weiter, wenn ihnen der Sauerstoff entzogen wird oder man versucht, sie herkömmlich mit Wasser zu löschen.
Die Feuerwehr setzt dennoch Wasser ein, um die brennende Batterie zu kühlen. Selbst nach Stunden kann sich ein Akku wieder selbst entzünden.
Hier helfen nur ein kontrolliertes Abbrennen und eine Brandbegrenzung, damit aufgrund der hohen Temperaturen oder austretender Flammen der Brand nicht auf die Umgebung übergreifen kann.
Der Name "Löschdecke" ist zwar landläufig, aber irreführend. Diese speziellen, hochtemperaturbeständigen Decken löschen keinen Akku- oder Batteriebrand. Was auf dem Grill noch funktioniert, geht bei Lithiumakkus nicht.
Bei Brandbegrenzungsdecken ist der Name Programm: sie begrenzen den Brand und somit auch den Schaden und geben Zeit, die örtliche Feuerwehr zu alarmieren, die über weitere Brandbekämpfungsmaßnahmen entscheidet.
Mehr zu diesem Thema in unseren Blogartikeln:
https://www.lion-care.com/aktuelles/blog/brandbekaempfungsstrategien-fuer-elektrofahrzeuge
https://www.lion-care.com/aktuelles/blog/akku-braende-bekaempfen-kuehlen-kontrollieren-oder-abwarten
Die deutsche DIN SPEC 91489 schafft Klarheit für Interessengruppen in verschiedenen Branchen.
Die DIN SPEC 91489 enthält mehrere Anforderungen für Brandbegrenzungsdecken, die wichtigsten sind im Folgenden aufgelistet:
- Allgemeine Anforderungen
Eigenschaften wie Schlaufen, Größe der Decke, Lagerung usw. werden erwähnt. - Thermische Beständigkeit
Die DIN SPEC erfordert eine minimale ISO13591-1-Klassifizierung B. Die Fire Isolator-Löschdecken haben jedoch eine höhere (die höchste) Klassifizierung: A1. - Mechanische Stabilität
Widerstand gegen Schneiden, Stabilität der Schlaufen usw. - Elektrostatische Ladung
- Schutz vor elektrischem Schlag
- Chemische Beständigkeit
- Kennzeichnungen
- Herstellerinformationen
- Mindestinhalt des Prüfberichts
- Schulung für den Einsatz durch Ersthelfer
Die DIN SPEC 91489 verlangt, dass Löschdecken schnell und einfach von zwei geschulten Einsatzkräften eingesetzt werden können, die persönliche Schutzausrüstung und Atemschutzgeräte tragen.
Im Falle eines Batteriebrandes verschafft eine solche Decke wertvolle Zeit, um die Feuerwehr zu alarmieren und das Übergreifen der Flammen zu verhindern. Dies trifft für alle möglichen Einsatzzwecke zu, sei es ein Handy, ein Laptop, ein E-Scooter, ein Werksroboter oder ein E-Auto.
Diese Frage wird die örtliche Feuerwehr beantworten, denn diese ist immer zu alarmieren und sie leitet weitere Brandbekämpfungsmaßnahmen ein.
Es ist hochgefährlich, ein brennendes E-Auto unter einer solchen Decke ausbrennen zu lassen und zu warten, bis alles vorbei ist. Ein Akkubrand könnte sich tagelang hinziehen und sich immer wieder neu entzünden. Beim Brand entstehen u.a. giftige Gase, die man schnellstmöglich eindämmen muss.
Die richtige Größe der Brandbegrenzungsdecke richtet sich maßgeblich nach dem brennenden Gegenstand und dessen Größe. Ein E-Scooter benötigt eine kleinere Decke als ein E-Auto oder ein Gabelstapler.
Messen Sie grob nach, wie groß die Decke sein muss, damit sie um den Gegenstand herum noch ca. 1-2m glatt auf dem Boden aufliegt. Vergessen Sie die Höhe nicht (z.B. SUV). Nur so kann sichergestellt werden, dass giftige Gase zum Großteil unter der Decke bleiben und dass Flammen keine Chance haben, die Umgebung des Brandherdes in Brand zu stecken.
Hier einige Beispiel für gängige Größen:
KFZ:
Größere Fahrzeuge wie Kombi, SUV, Limousine, Gabelstapler: Die Brandbegrenzungsdecke sollte mindestens 6x8m groß sein (Höhe des Fahrzeugs mit berücksichtigen)
Mittlere Fahrzeuggröße: Die Brandbegrenzungsdecke sollte mindestens 5x6m groß sein
Kleinere Elektrofahrzeuge, z.B. Lagerroboter: Die Brandbegrenzungsdecke sollte mindestens 3x4m groß sein
Geräte Akkus, wie Akkuschrauber, Gartengeräte: Die Brandbegrenzungsdecke sollte mindestens 1,5x1,5m groß sein
Handys und Laptops: Die Brandbegrenzungsdecke sollte mindestens 1,5x1,5m groß sein
Auch materialseitig gibt es Unterschiede. Die Brandbegrenzungsdecken unterscheiden sich z.B. durch die Zusammensetzung, die Materialstärke und die Temperaturbeständigkeit. Dies ist z.B. ausschlaggebend, wenn die Decken direkt auf Batterien, nicht verbaut, wie bspw. in Fahrzeugen eingesetzt werden sollen.
Vergessen Sie bei der Anschaffung nicht das Gewicht der Decken. Eine große Decke wiegt schnell 25-45 kg. Hier gibt es z.B. die Aufbewahrungsmöglichkeit in einem Trolley.
Im Falle eines Brandes und des aktiven Einsatzes der Decke, nein. Wir raten davon dringend ab. Erstens können durch die extremen Temperaturen Schäden am Material entstehen, die von Laien nicht zuverlässig beurteilt werden können und zweitens entstehen bei Bränden giftige Gase, die gesundheitsschädlich sind und sich am Material festsetzen.
Ohne einen Schadensfall kann die Decke immer wieder zum Schutz verwendet werden.
Auch hier ist die Größe und das Brandverhalten des Objekts entscheidend. Ein E-Bike Akku erreicht andere Temperaturen als der Brand eines E-Autos.
Beim Brand eines E-Fahrzeuges treten Temperaturen von bis zu 1.000°C auf - kurzfristig aber auch Spitzen von 1.200°C.
Eine genaue Aussage über die entstehenden Temperaturen und die Branddauer ist, aufgrund des unterschiedlichen Brandverhalten, seriös zu treffen.