
plus VAT.
Please note: Notes on delivery time
Free shipping (Germany, mainland)!
Shippingtime: 1-2 Wochen
- Article no: CEMVG1AKST

Our employee Ingo Jüstel will be happy to assist you:
+49 7151 - 2564811 or info@lion-care.com
Handling the filling material: | Backfill |
max. gross mass: | 60 kg |
Type: | Storage barrel |
Empty weight: | 6.9 kg |
Material: | Steel (painted) |
Volume: | 60 l |
Packaging group: | Packaging group I, Packaging group II |
Packaging instructions according to ADR: | PI 903, PI 908, PI 909 |
ADR special provision: | SP 376, SP 377 |
UN packaging code: | 1A2 / X60 / S /... |
Areas of application: | Power tool batteries, Recycling centers, Garden tool batteries, Model batteries |
External dimensions: | 382 x 680 mm |
Filling material: | Vermiculite |
Internal dimensions: | without specification |
This safety garbage can is a simple and inexpensive system for safely storing and transporting lithium-ion batteries from eBikes, power tools, garden tools, etc. The garbage can is particularly suitable for collecting defective lithium-ion batteries and rechargeable batteries and storing them until disposal.
If required, please contact us for a customized offer.
Size, structure and function of the safety bin
The CEMO battery safety garbage can has a diameter of 382 mm and a height of 680 mm, with a capacity of 60 liters. The empty weight is approx. 6.9 kg. The garbage can is supplied with a 50-liter bag of vermiculite. When the garbage cans are full, they should not be stacked.
Features
This system is a clamping ring lid drum with a special valve to relieve pressure in the event of damage. This works on the principle of a pressure cooker. The container is supplied ex works with a plastic bag and is half filled with vermiculite filling material.
Scope of delivery
- Accumulator safety bin
- 50 liter vermiculite bag
- Large sticker with hazardous goods pictogram 9A
- Packaging instructions based on P903 and P908 of the ADR
- 2 inlay bags (650 x 1200 mm), 150 μm
- 10 inner bags for packing defective batteries (400 x 500 mm), 150 μm
- 2 cable ties
Certification and guidelines
Lithium batteries fall into dangerous goods class 9, which means that the goods pose a risk to the environment during transportation that should not be underestimated. Numerous specifications and guidelines must therefore be observed when transporting lithium batteries
Certified as packaging group I
The battery safety garbage can meets the requirements of packaging group I, which means that substances with a high hazard potential may be transported in it. UN X coding is also available.
Suitable for transportation in accordance with SV 376 of the ADR and packing instruction P 908
All lithium-ion cells or batteries and lithium-metal cells or batteries that have been damaged and no longer comply with the applicable regulations according to their manual must comply with the provisions of Special Provision 376 (SV 376). This applies, for example, to cells that have leaked or degassed, have suffered external or mechanical damage or have been identified as defective for safety reasons or could no longer be diagnosed prior to transportation. These cells must then be packed in accordance with packing instruction P 908. According to this directive, for example, it must be ensured that any electrolytes released are absorbed and a non-electrically conductive thermal insulation material must ensure that the environment is protected from dangerous heat generation.
For storage, transportation and recycling in accordance with SV 377 of the ADR and packaging instruction P 909
Special provision SV 377 regulates the transportation of lithium-ion cells or batteries and lithium-metal cells or batteries that are transported for disposal or recycling. Similar to packing instruction P 908, guidelines for packing group II must be observed in P 909. In addition, restrictions on the nominal energy and weight of lithium-ion cells and batteries apply.
The manufacturer
CEMO GmbH from Weinstadt has stood for safe storage with imagination and energy for more than 60 years. The company is a pioneer in the field of modern transportation and storage container technology and is one of the market leaders in this area.
Future-oriented
Lithium-ion batteries will be indispensable in all industrial applications in the coming years. However, if used improperly, batteries can pose a potential hazard during production, storage and transportation that should not be underestimated. By purchasing this safety buoy, you protect yourself against major financial losses right from the start.
In use for you
If you have any questions, please do not hesitate to contact us. We look forward to hearing from you!
Handling the filling material: | Backfill |
max. gross mass: | 60 kg |
Coding: | 1A2 |
Filling material supplied: | Vermiculite (bulk material) |
Volume: | 0 - 84 l |
Verpackungsart: | Dangerous goods packaging < 450 liters or < 400 kg net |
Material: | Steel |
Type: | Storage barrel |
Empty weight: | 6.9 kg |
Suitable for critically defective?: | No |
Material: | Steel (painted) |
Volume: | 60 l |
Packaging group: | Packaging group I, Packaging group II |
Packaging instructions according to ADR: | PI 903, PI 908, PI 909 |
ADR special provision: | SP 376, SP 377 |
UN packaging code: | 1A2 / X60 / S /... |
Areas of application: | Power tool batteries, Recycling centers, Garden tool batteries, Model batteries |
External dimensions: | 382 x 680 mm |
Filling material: | Vermiculite |
Internal dimensions: | without specification |