Fingerhuth Fire Containment Blanket / Fire Blanket S-TYPE Vehicle 7.5 x 9 m Fire blanket for motor vehicles

Compact information

Dimensions: 7,500 x 9,000 mm
Heat resistance: 1,600°C (short-term), 1,200°C (long-term)
Including PVC insert pocket

Technical data

Dimensions (mm):	7,500 × 9,000
Heat resistance (permanent) ° C:	1,200
Heat resistance (short-term) ° C:	1 600
Material:	Silica fabric
Suitable for:	Car, Small vehicles

Product information „Fingerhuth Fire Containment Blanket / Extinguishing Blanket S-TYPE Vehicle 7.5 x 9 m“

1. Brief Overview

The Fingerhuth fire containment blanket S-TYPE VEHICLE (hereinafter also referred to synonymously as a fire extinguishing blanket or fire protection blanket) is designed for covering damaged or burning devices with lithium-ion batteries. Its purpose is to isolate flames under the blanket as effectively as possible, reduce the temperature, and limit explosions under the blanket.

Fires involving lithium-ion batteries present a particular challenge, as conventional fire extinguishers often reach their limits here. The S-TYPE fire containment blanket offers a simple, quickly deployable way to enclose a fire source and thus protect the surrounding area.

Please note: In general usage, the term “fire blanket” is often used. Technically, this is a fire containment or fire protection blanket – the fire is primarily contained, not actively extinguished.

2. Areas of Application & Operating Conditions

Fire containment and enclosure of fires or fire sources involving lithium-ion batteries
Suitable, among other things, for:
- Motor vehicles and lithium-ion batteries
- Areas of application: e.g. auto repair shops, garages, charging stations, and warehouse logistics
Use as a heat shield and for the controlled containment of battery fires:
- Containment of flames
- Limitation of the temperature in the surrounding area

Note on the standard situation (“fire blanket”):
The European standard DIN EN 1869:2019-10 refers to fire blankets for grease and cooking oil fires (deep-frying fats up to 3 l). The PREMIUM fire containment hood offered here is not certified according to this standard and is not intended for cooking oil and cooking fat fires. The intended use is the containment or limitation of Li-ion battery fires.

3. Technical Data

3.1 Material & Structure

Fabric: silica fabric

Coating: vermiculite coating

Non-combustible

High-frequency permeable so as not to interfere with emergency signals

3.2 Temperature Resistance

Short-term temperature resistance: up to 1,600 °C

Long-term temperature resistance: 1,200 °C

4. Approvals & Safety Features

Compliant with DIN SPEC 91489 (fire containment blankets for lithium-ion batteries)

Non-combustible according to DIN EN 13501 (A2)

High electrical resistance (DIN 54345-1)

5. Instructions for Use & Operation

Basic principle of use:

The blanket is spread out using the handles and carefully placed over the burning or endangered object by 2 people
Depending on the fire load, the fire is usually smothered or significantly contained within a short time
To support sufficient cooling (below approx. 100 °C), the blanket should remain on the object for as long as possible

Important notes:

After removing the blanket, check that there is no re-ignition – even individual battery cells may react again after a delay
If possible, always use personal protective equipment (PPE)
In the event of fires, the fire brigade should always be called in

Storage / Keeping:

Store the blanket in the trolley or in the PVC insert bag
Store in a dry place; do not place loads directly on the blanket

6. Conclusion

The S-TYPE fire containment blanket is designed for the enclosure and limitation of fires related to lithium-ion batteries. Thanks to its heat-resistant silica fabric with vermiculite coating, tested temperature resistance, and electrical insulation effect, it supports controlled burn-off behavior.

7. For You in Action

If you have any questions, please feel free to contact us. We look forward to speaking with you.

Dimensions (mm):	7,500 × 9,000
Heat resistance (permanent) ° C:	1,200
Heat resistance (short-term) ° C:	1 600
Material:	Silica fabric
Suitable for:	Car, Small vehicles