- Dimensions: 5,000 x 5,000 mm
- Heat resistance: 1,200°C (short-term), 1,000°C (long-term)
- Including trolley
Do you have some questions about this product?
- Your personal contact person
- Name: Petra Fürbeck
- E-Mail: info@lion-care.com
- Phone: +49 (0) 7151 - 256 4817
Technical data
| Dimensions (mm): | 5 000 x 5 000 |
|---|---|
| Heat resistance (permanent) ° C: | 1 000 |
| Heat resistance (short-term) ° C: | 1 200 |
| Material: | Fiber optic fabric |
| Suitable for: | Industrial trucks |
| Weight (kg): | 20 |
Product information „Fingerhuth fire containment blanket / fire blanket H-TYPE FFZ 5 x 5 m“
1. Brief Overview
The Fingerhuth H-TYPE fire containment blanket (hereinafter also referred to synonymously as a fire extinguishing blanket or fire protection blanket) is designed to cover damaged or burning devices with lithium-ion batteries. Its purpose is to isolate flames under the blanket as effectively as possible, reduce the spread of smoke and toxic gases, lower the temperature, and limit explosions under the blanket.
Fires involving lithium-ion batteries present a particular challenge, as conventional fire extinguishers often reach their limits here. The H-TYPE fire containment blanket offers a simple, quickly deployable way to enclose a fire source and thus protect the surrounding area.
Please note: In general usage, the term “fire blanket” is often used. Technically, this is a fire containment or fire protection blanket – the fire is primarily contained, not actively extinguished.
2. Areas of Application & Conditions of Use
-
Fire containment and enclosure of fires or fire sources involving lithium-ion batteries
-
Suitable for, among other things:
-
(E-)vehicles such as e-scooters and industrial trucks
- Areas of application: e.g. auto repair shops, garages, charging stations, and warehouse logistics
-
-
Use as a heat shield and for the controlled containment of battery fires:
-
Containment of flames
-
Reduction of smoke and gas emissions
-
Limitation of the temperature in the surrounding area
-
Note on the standards situation (“fire blanket”):
The European standard DIN EN 1869:2019-10 refers to fire blankets for grease and cooking oil fires (deep-frying fats up to 3 l). The PREMIUM fire containment cover offered here is not certified according to this standard and is not intended for cooking oil and cooking fat fires. Its intended use is the containment or limitation of Li-ion battery fires.
3. Technical Data
3.1 Material & Structure
- Fabric: HR glass fabric
- Coating: FR silicone coating
- Non-combustible
- High-frequency permeable so as not to interfere with emergency signals
3.2 Temperature Resistance
- Short-term temperature resistance: up to 1,200 °C
- Long-term temperature resistance: 1,000 °C
3.3 Dimensions & Weight
- Dimensions: 5 000 x 5 000 mm
- Weight: 20.2 kg
4. Approvals & Safety Features
- Compliant with DIN SPEC 91489 (fire containment blankets for lithium-ion batteries)
- Non-combustible according to DIN EN 13501 (A2)
- High electrical resistance (DIN 54345-1)
5. Notes on Use & Operation
Basic principle of use:
- The blanket is spread out using the handles and carefully placed over the burning or endangered object by 2 people
- Depending on the fire load, the fire is usually smothered within a short time or significantly contained
- To support sufficient cooling (below approx. 100 °C), the blanket should remain on the object for as long as possible
Important notes:
- After removing the blanket, check that no re-ignition occurs – even individual battery cells may react again after a delay
- If possible, always use personal protective equipment (PPE)
- In the event of fires, the fire brigade should always be called
Storage / Keeping:
- Store the blanket in the trolley
- Store in a dry place; do not place any loads directly on the blanket
6. Conclusion
The H-TYPE fire containment blanket is designed for the enclosure and limitation of fires related to lithium-ion batteries. Thanks to its heat-resistant glass fabric with silicone coating, tested temperature resistance, and electrical insulating effect, it supports controlled burn-off behavior and the reduction of smoke and gas release.
7. There for You in Action
If you have any questions, please feel free to contact us. We look forward to exchanging ideas with you.
| Dimensions (mm): | 5 000 x 5 000 |
|---|---|
| Heat resistance (permanent) ° C: | 1 000 |
| Heat resistance (short-term) ° C: | 1 200 |
| Material: | Fiber optic fabric |
| Suitable for: | Industrial trucks |
| Weight (kg): | 20 |