PRIOPACK-T storage & transport container large Plastic container for lithium-ion batteries
- Also for defective batteries
- External dimensions: 600 x 400 x 235 mm
- Internal dimensions: 507 x 308 x 144 mm
Do you have some questions about this product?
- Your personal contact person
- Name: Petra Fürbeck
- E-Mail: info@lion-care.com
- Phone: +49 (0) 7151 - 256 4817
Technical data
| ADR special provision: | SV 310, SV 376, SV 377 |
|---|---|
| Applications areas: | Garden tool batteries, Loose cells, Model building batteries, Power tool batteries |
| Battery status: | Defective |
| Encoding: | 4H2 |
| Filling material: | Vermiculite |
| Handling filling material: | into cushions and fire-resistant building panels |
| Included filler material: | Vermiculite (fill pillow), without filler material |
| Internal dimensions (mm): | 507 x 308 x 144 |
| Material: | Plastic |
| Material designation: | Polypropylene (PP) |
| Max. gross weight (kg): | 30 |
| Outer dimensions (mm): | 600 x 400 x 235 |
| Packaging group: | I, II and III |
| Packaging instruction according to ADR: | P 903, P 908, P 909, P 910 |
| Packaging type: | Dangerous goods packaging < 450 liters or < 400 kg net |
| Suitable for critically defective?: | No |
| Tipping weight (kg): | 12.4 |
| Type: | Storage box |
| UN packaging code: | UN 4H2/X30/S/yy/B/UTZ-000015 |
| Volume (l): | 21 - 50 |
| Volume (l): | 0 - 84 |
| max. net cargo mass (kg): | 17, 6 |
Product information „PRIOPACK-T storage & transport container large“
Suitable filling material for the battery storage and transport container
The appropriate filling material is required to use the PRIOPACK-T battery container. If you do not have any filling material, please order the version "Incl. 4 x Priopack filling material, 8 pieces each". You can find additional filling material in the Accessories tab.
In buildings and storage facilities where lithium-ion batteries are stored, damaged cells can pose a high risk to employees and to operating and storage equipment. Explosive fires caused by batteries ("thermal runaway") are difficult to control.
Size, design and function of the container
The PRIOPACK-T container is available in two versions. This larger version has external dimensions of 600 x 400 x 235 mm and internal dimensions of 507 x 308 x 144 mm (length x width x height). It weighs 12.4 kg. The container is grey in colour.
90 minutes fire resistance
The container is made of plastic and lined with fire-resistant building boards on the inside, enabling it to remain stable for 90 minutes in the event of a fire.
Sturdy lid with tension lock
The lid is securely closed with tension straps and locking buckles. This type of closure ensures maximum safety during transport. Under the lid is another fire protection panel that seals the interior.
With vermiculite cushions: an additional safety feature
Vermiculite filler packs must be ordered separately for this container. The container can be ordered directly with 4 filler packs. Vermiculite is non-flammable and further insulates the heat energy.
Suitable for transport in accordance with SV 376 of the ADR and packaging instruction P 908
The PRIOPACK-T plastic transport box is specially designed for the transport of damaged or defective lithium-ion and lithium metal batteries. It meets the requirements of Special Provision 376 (SV 376) of the ADR and Packaging Instruction P 908. This applies, for example, to cells that have leaked or degassed, show mechanical damage or have been identified as defective for safety reasons. If diagnosis is not possible prior to transport, these regulations also apply.
The PRIOPACK-T ensures that released electrolytes are absorbed and that a non-conductive thermal insulation material protects the environment from dangerous heat build-up.
For storage, transport and recycling in accordance with SV 377 of the ADR and packaging instruction P 909
PRIOPACK-T is also suitable for the transport of lithium-ion and lithium-metal batteries for disposal or recycling. In accordance with special provision SV 377 and packaging instruction P 909, packaging guidelines for packaging group II must be observed. In addition, restrictions apply with regard to the nominal energy and weight of the batteries to be transported.
Prototype transport in accordance with SV 310 of the ADR and packaging instruction P 910
For the transport of prototypes of lithium-ionor lithium metal batteries that have not yet passed all UN 38.3 tests, the PRIOPACK-T meets the requirements of special provision SV 310 and packaging instruction P 910. Among other things, these provisions set requirements for packaging safety and dangerous goods dimensions to ensure safe transport.
The manufacturer
PRIORIT AG, based in Hanau, has been synonymous with innovative structural fire protection solutions for 20 years. Its product range extends from products for the structural protection of escape and rescue routes to solutions for tunnel construction and the protection of IT systems and storage of hazardous materials.
PRIORIT manufactures fire-resistant components with decorative surfaces based on non-combustible building materials, thus offering the possibility of harmonising safety and design aspects.
Future-oriented
Lithium-ion batteries will become indispensable in all industrial applications in the coming years
.
However, if used improperly, these batteries can pose a potential hazard that should not be underestimated during manufacture, storage and transport. By purchasing this storage container, you are protecting yourself against major financial losses right from the start.
Working for you
Please do not hesitate to contact us if you have any questions. We look forward to hearing from you!
| ADR special provision: | SV 310, SV 376, SV 377 |
|---|---|
| Applications areas: | Garden tool batteries, Loose cells, Model building batteries, Power tool batteries |
| Battery status: | Defective |
| Encoding: | 4H2 |
| Filling material: | Vermiculite |
| Handling filling material: | into cushions and fire-resistant building panels |
| Included filler material: | Vermiculite (fill pillow), without filler material |
| Internal dimensions (mm): | 507 x 308 x 144 |
| Material: | Plastic |
| Material designation: | Polypropylene (PP) |
| Max. gross weight (kg): | 30 |
| Outer dimensions (mm): | 600 x 400 x 235 |
| Packaging group: | I, II and III |
| Packaging instruction according to ADR: | P 903, P 908, P 909, P 910 |
| Packaging type: | Dangerous goods packaging < 450 liters or < 400 kg net |
| Suitable for critically defective?: | No |
| Tipping weight (kg): | 12.4 |
| Type: | Storage box |
| UN packaging code: | UN 4H2/X30/S/yy/B/UTZ-000015 |
| Volume (l): | 21 - 50 |
| Volume (l): | 0 - 84 |
| max. net cargo mass (kg): | 17, 6 |
Downloads
FAQ
accessories
Filling material packets for filling the PRIOPACK storage container for lithium-ion batteries. The packets are filled with the layered silicate vermiculite, which is suitable for use in sound and heat insulation as well as for fire protection. External dimensions: approx. 180 x 150 mm. Total weight per packaging unit (1 PU=8 pieces): 520 g (approx. 65 g per piece). Depending on the size of the batteries used, 2 to 3 PUs per storage box are recommended.