PRIOCOVER Mobile Fire Protection Cover - incl. Cable Seal and Fitting Set for lithium-ion batteries
- External dimensions: 1 390 x 990 x 1 005 mm
- Internal dimensions: 1 300 x 900 x 908 mm
- Made of non-combustible board building material
- Including cable bulkhead and fitting set
Do you have some questions about this product?
- Your personal contact person
- Name: Petra Fürbeck
- E-Mail: info@lion-care.com
- Phone: +49 (0) 7151 - 256 4817
Technical data
| Applications areas: | Storage |
|---|---|
| Fire protection class: | F90 |
| Internal dimensions (mm): | 908 x 1300 x 900 |
| Outer dimensions (mm): | 1 005 x 1 390 x 990 |
| Weight (kg): | 400 |
Product information „PRIOCOVER Mobile Fire Protection Cover - incl. Cable Seal and Fitting Set“
In warehouses where lithium-ion rechargeable batteries / batteries are stored, malfunctioning cells can pose a high hazard potential to employees and operational and warehouse technology. Explosive battery fires (“thermal runaway”) are difficult to control. In the "General Safety Rules for Lithium Batteries (VdS 3103: 2019-06)", VdS recommends removing damaged or defective lithium batteries from storage and production areas immediately and storing them temporarily at a safe distance or in a fire-protection-separated area. This PRIOCOVER cover housing from PIORIT is a simple and portable solution for active and passive fire protection of lithium-ion rechargeable batteries. If you are interested, please contact us to receive an individual offer tailored to you.
Size, design and function of the fire protection cover
The PRIOCOVER mobile fire protection cover has external dimensions of 1,390 x 990 x 1,005 mm (LxWxH) and internal dimensions of 1,300 x 900 x 908 mm (LxWxH). The weight is 400 kg. Custom sizes are also available on request.
Solid housing made of non-combustible board material
The housing consists of a non-combustible board material with a wall thickness of 42 mm. It features a solid construction, high stability and high surface hardness. It is a CPL surface (Continuous Pressure Laminate), in which the board layers are pressed under constant pressure and temperature. The housing is finished in light grey, similar to RAL 7035. In addition, the fire protection cover is recyclable and free of harmful substances.
Can be lifted with a forklift
Crane eyes on the sides make it possible to lift the housing using round slings and a forklift. In use, the fire protection cover is simply placed over loaded Euro pallets, drip trays or wire mesh boxes.
Efficient handling - rechargeable batteries / batteries remain on the pallet
For storage under the mobile fire protection cover, the lithium-ion batteries / rechargeable batteries can remain on the pallet, avoiding time-consuming reloading or rearranging. In addition, damaged batteries can be safely protected from further damage or access until collection or disposal.
Fitting set enables the introduction of cooling water or cable transit
Optionally, a fitting set can be installed on the top to direct cooling water into the container and/or a cable transit for safely charging the rechargeable batteries.
Round slings, carabiners and floor drip tray available as optional accessories
A lifting set consisting of 2 round slings and 4 carabiners, as well as a floor drip tray to collect any possible leaks, are available as accessories for the mobile battery fire protection cover.
Certification and guidelines of the mobile battery fire protection cover
The surface material is non-combustible according to classification A2 – s1, d0. The housing is suitable for providing a fire resistance rating of 90 minutes. It has been tested according to European standards (EN) and has a Green Building declaration according to LEED and DGNB.
The manufacturer
PRIORIT AG from Hanau has stood for innovative structural fire protection solutions for 20 years. The range extends from products for the structural protection of escape and rescue routes to solutions for tunnel construction and the protection of IT systems and the storage of hazardous materials.
Based on building materials classified as non-combustible, PRIORIT manufactures fire-resistant components with decorative surfaces, thereby offering the possibility of harmonizing safety and design aspects.
Safe storage of rechargeable batteries with the mobile fire protection cover
Lithium-ion batteries will become indispensable in all industrial applications in the coming years. However, improper use can result in a considerable hazard potential from the batteries during manufacturing, storage and transport. By purchasing this mobile fire protection cover, you protect yourself against major financial losses right from the start.
Questions about the safe storage or transport of Li-ion rechargeable batteries?
Please feel free to contact us if you have any questions. We look forward to hearing from you!
| Applications areas: | Storage |
|---|---|
| Fire protection class: | F90 |
| Internal dimensions (mm): | 908 x 1300 x 900 |
| Outer dimensions (mm): | 1 005 x 1 390 x 990 |
| Weight (kg): | 400 |
Downloads
FAQ
accessories
Floor drip tray for the PRIOCOVER fire protection enclosure. The tray has external dimensions of 30x1250x80 mm (height x width x depth). The container is used to collect liquids in the event of any leaks from the batteries or rechargeable batteries. At your service Please do not hesitate to contact us if you have any questions. We look forward to hearing from you!
Lifting kit for safely lifting, transporting and lowering the PRIOCOVER fire protection cover. The kit consists of 2 round slings and 4 carabiners, which can be used to lift the housing with a forklift truck, for example. At your service Please do not hesitate to contact us if you have any questions. We look forward to hearing from you!